This product is designed specifically for the collection of used and discarded automotive batteries for recycling. The pallet is designed for positioning in tire shops, automotive supply stores, etc. where such products are returned as cores or are reclaimed. The following specification will outline the basic parameters of the design and the unique features required for corrosive service such as this.

. Model No. Size (WxLxH)
BP-48 48" x 48" x 12"
BP-36 36" x 36" x 12"
Material: 10 Ga. A-36 Cold Rolled Steel
Grating: FRP Resin Reinforced Fiberglass specifically designed for sulphuric acid service.
Interior Finish: HazCote with the capability of 98% Sulphuric Acid for 72 hours without visible deterioration.
Exterior Finish: White Enamel
All units have a secondary containment capacity of 75 gallons of liquid. Containment sumps are elevated 4" above the floor for cleaning and inspection. All units are forklift or pallet jack portable fully loaded and can easily be moved by hand unloaded.

This basic design can be reconfigured in a wide variety of lengths, widths and heights, depending on the application, with little or no increase in cost. Our engineering staff will be happy to address any special requirements you may have.

This product is in full compliance with the secondaty containment requirements of 40 CFR section 265.193.

About Us | Site Map |Contact Us | ©2006 Hazmat Chemical Storage, Inc.